Elo-touchsystems AMM170TK Manuel d'utilisateur télécharger pdf (Page 3)

AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TK(HB) 3

Quick Setup (IBM/IBM Compatible under Windows 95/98/ME/2000)

Please Read Carefully When Setting Up Your New Monitor

Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible

Computers with Windows based OS system.

Before adjusting the monitor, all the necessary drivers should be installed to your System

and resolution has to be set to manufacturers recommended preset of 1280 x 1024 @ 60Hz,

70Hz, 72Hz or 75 Hz.

To check the resolution, press the SELECT UP button on the monitor and the Information

will display under the OSD. Information will have Resolution, Horizontal and Vertical (Refresh

rate) frequency information.

To change the resolution to its factory recommended preset.

1. On a Windows 95, 98, ME or 2000, press right button on a Mouse to execute the Pop-up

menu.

2. Press Properties to execute the Display Properties

3. Press Setting and change the resolution to 1280 x 1024.

4. Press Apply or OK to select and press OK to keep the selected resolution.

5. Go back to Display Properties - Setting - Advanced properties - Adapter

6. On Adapter property, change the refresh rate to 60Hz, 70Hz, 72Hz or 75Hz. If you dont

have these options, choose Adapter Default. (60Hz recommended)

Screen Adjustment Procedure

1. Press the AUTO button.

2. If you still dont have a clear display monitor, please refer to step 3.

3. Start Shut Down in Windows 95/98/ME/2000 - It will display moire on screen

4. Press Up or Down button then the OSD menu will pop-up.

5. Adjust the Frequency under the OSD to reduce or get rid of the vertical display noise

(Jail bars). (Page 16)

6. Once the vertical display noise disappears, press adjust the Phase to reduce or get rid of

the horizontal display noise (Snowy effect). (Page 16)

1 2 3 4 5 6 7 8 ... 36 37

Pas de commentaire

Elo-touchsystems AMM170TK Manuel d'utilisateur Page 3