Elo TouchSystems B-Series Guide de l'utilisateur télécharger pdf (Page 144)

LD9100-PT, LD9300-PT, LD9400-PT and LD9500-PT

1. Type “ABCDEFGH” and press ENTER key. The display will show

“ABCDEFGH” on the first line.

2. Type “^APASSTHRU” (^A is entered as Ctrl-A ) and press ENTER

key. The data will be passed through to the peripheral (e.g. a

printer). These characters are not shown on the display.

3. Type “!#^BNUMBER12345” (^B is entered as Ctrl-B), then press

ENTER key. The display will show “NUMBER12345” on the first

line.

4. To end the test press Ctrl-C (hold down Ctrl and press C).

LD9200-PT

1. Type “!#1ABCDEFGH” and press ENTER key. The display will

show “ABCDEFGH” on the first line.

2. Type “PASSTHRU” and press ENTER key. The data will be

passed through to the peripheral (e.g. a printer). These characters

are not shown on the display.

3. Type “!#1NUMBER12345”, then press ENTER key. The display

will show “NUMBER12345” on the first line.

4. To end the test press Ctrl-C (hold down Ctrl and press C).

Parallel Interface Pole Displays Functional Test

This procedure assumes the pole display is connected to the LPT1

port of the computer. If parallel port LPT2 is being used, type LPT2

where LPT1 is called out.

LD9090, LD9390, LD9490, LD9590 and LD9990

1. Type “ECHO ABCDEFGH>LPT1” and press ENTER key. The

display will show “ABCDEFGH” on the first line.

LD9290

1. Type “ECHO !#1ABCEDFGH>LPT1” and press ENTER key. The

display will show “ABCDEFGH” on the first line.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 164 165

Pas de commentaire

Elo TouchSystems B-Series Guide de l'utilisateur Page 144